Cummins ISB 6.7L Navistar/International Holset VGT Turbo Actuator

Please call us at 682-323-5959 to confirm current stock availability.

This remanufactured Cummins ISB6.7 International VGT turbo actuator is a professionally rebuilt Holset variable geometry (VGT) electronic actuator for 2013 and newer Cummins ISB 6.7L engines found on Navistar/International and Freightliner trucks with the HE300VG turbocharger. This is the “vented-hole” style actuator referenced in Cummins service documentation. The actuator controls the turbocharger’s VGT vane position, regulating boost pressure, throttle response, and emissions performance across the full RPM range. Every unit is tested to ensure it will pass installation and calibration via compatible diagnostic software such as Cummins INSITE.

When a Cummins ISB6.7 International VGT turbo actuator fails, common symptoms include limp mode, low power, poor fuel economy, excessive black smoke, turbo lag, and fault codes tied to VGT actuator position or boost pressure. Replacing a worn or faulty unit with this remanufactured Cummins ISB6.7 International VGT turbo actuator restores correct vane control without the expense of replacing the entire turbocharger.

Note: All VGT actuators must be calibrated to your turbocharger prior to operation using Cummins INSITE or another capable diagnostic tool. Calibration procedures may vary depending on the vehicle application and diagnostic tool used.

Includes a 1-year limited warranty — see our Warranty & Return Policy for full details.

---

Compatible Applications

This remanufactured Cummins ISB6.7 International VGT turbo actuator fits the following applications. Please verify your actuator part number against the cross-reference table below before ordering.

• Navistar / International medium-duty trucks with the 2013+ Cummins ISB 6.7L engine (CM2350, CM2450)
• Freightliner trucks equipped with the 2013+ Cummins ISB 6.7L engine and HE300VG turbocharger
• EPA13 and newer Cummins ISC / ISL9 / L9 engines using the same vented-hole actuator

Why Choose A Remanufactured Cummins ISB6.7 International VGT Turbo Actuator?

New OEM Holset actuators carry a steep price tag, and low-cost imitations frequently fail or will not hold calibration. A remanufactured Cummins ISB6.7 International VGT turbo actuator from Vortex Turbo delivers OEM-level reliability at a fraction of the cost of a new unit. Every actuator is rebuilt by diesel electronics specialists and tested to ensure it passes installation and calibration — a dependable choice for owner-operators, fleets, and independent diesel repair shops.

Product Features

• Professionally remanufactured by experts in the diesel electronics industry — not just a repaired or cosmetically restored unit
• Two-stage media blasting process for a new-look satin finish
• All high-wear and failure-prone components replaced with OEM or better-quality equivalents
• Brand-new high-quality Japanese, German, or Swedish bearings
• Brand-new interior and exterior bolts and rubber mounting gaskets
• 1-year limited warranty included

Installation & Calibration Notes

The Cummins ISB6.7 International VGT turbo actuator bolts directly to the turbocharger and connects to the OEM wiring harness. After mechanical installation, the actuator must be calibrated to the specific turbocharger using Cummins INSITE or a comparable diagnostic tool — an uncalibrated actuator will not correctly control vane position. Contact Vortex Turbo before ordering if you are unsure whether this actuator matches your turbocharger.

Product Specifications

Manufacturer: Holset
Condition: Remanufactured
Make: Cummins
Vehicle Model(s): International / Navistar trucks, Freightliner trucks
Engine(s): Cummins ISB 6.7L (ISB6.7), ISL9 / L9, CM2350, CM2450
Turbo Model(s): HE300VG
Actuator Style: Vented-hole

Disclaimer: This is a professionally remanufactured turbo actuator. We are not affiliated with, endorsed by, or sponsored by Cummins Inc. or Holset Turbochargers. All trademarks and brand names are the property of their respective owners.

---